Skip to main content

Sea Turtle Tag

Hello! This week, the Stampendous team is continuing the "Part of Your World" theme that we have going on this month. This week, we are going "Under the Sea." I have been waiting to share this tag with you for quite a while. I had such a blast making it. Full instructions are below.


Supplies:
Stampendous:
CRV334: Sea Turtle
DWLG629: Scales Stencil
DP111: Detail Black Embossing Powder
EJK06: Teal Encrusted Jewels Kit- Detail Capri
SSC1246: Ocean Wisdom
DCP1006: Fitted Frames Set B
DWDPK: Palette Knife

Other:
DecoArt Media: Fluid Acrylics in Yellow Iron Oxide, Burnt Umber, Green Gold, Cobalt Blue Hue, Prussian Blue, Transparent Yellow Iron Oxide, Quinacridone Gold. White Gesso. Texture Sand Paste.
Imagine: VersaMark Ink, Goosebumps, Jet Black StazOn, On Point Glue, Large Sponge Dauber
Creative Impressions: #70128- 3/4" Gold Crepe Ribbon
Molotow: Signal White Extra Fine ONE4ALL Paint Pen
Scrapbooks Adhesieves: Foam Squares
Staples: Tag
Artist's Loft: Water Color Paper
Vellum
Sequins
Scruffy Brush


Directions:
1. On watercolor paper, paint Transparent Yellow Iron Oxide, Burnt Umber, and Green Gold approximately where the turtle would be. Try to keep in mind what colors you would like where on the turtle.

2. While the paint is drying, gesso the tag.

3. After the paint has dried, stamp the turtle with VersaFine ink and emboss with Detail Black embossing powder.

4. Cut out the turtle.

5. Paint the tag using a back and forth (east to west) motion with Cobalt Turquoise Hue, Prussian Blue Hue, and Transparent Yellow Iron Oxide using a scruffy brush. You can mix the colors with some water if you wish. Let dry.

6. Tape the Scales Stencil on top of the tag and apply VersaMark ink with a Large Dauber.

7. Emboss with Detail Capri embossing powder.

8. Apply Textured Sand Paste around the edge of the tag with the Palette Knife. Be sure not to overwork the paste, especiall on top of the embossed areas. Let dry.

9. Paint a wash of Prussian Blue Hue on to the texture paste.

10. Using the Molotow pen, draw in highlights on to the turtle's shell and the white's of his eyes.

11. Apply Goosebumps all over the turtle with a brush. Make it thick.

12. Apply Quinacridone Gold all over the Textured Sand border.

13. Stamp the sentiment on to vellum using Jet Black StazOn.

14. Die cut the sentiment sing the Large "J" Fitted Frame.

15. Add 2 sequins to the vellum using On Point Glue.

16. Add more On Point to the underside of the vellum where the sequins is and to the upper right corner where it will be under the turtle's head.

17. Apply foam squares to the turtle and attach to the tag.

18. Add ribbon to the tag.

Please be sure to visit the rest of the team that's posting today. Their links are below. Thanks so much for stopping by. Have an inspiring day!

Comments

Love this turtle tag! The gloss on the shell is awesome! TFS!
Stampendous said…
Love, LOVE this tag! So much to look at and techniques to try after seeing them! Fabulous project, Alison, thank you for sharing!
Viki Banaszak said…
I love your turtle tag! Perfect amount of glossy goodness and the saying is awesome.
Mary Holshouser said…
Turtle looks like you could pick him
up and hold him.
Beautiful shell.
thanks for sharing.

Popular posts from this blog

Horse Friends

Hello! This week, the Stampendous team is previewing some of the newest stamps that will be in the 2018 January catalog. You are in for a real treat! There are so many wonderful new images! I had a tough time deciding which to share first, but the beautiful Horse Friends stamp by Laurel Burch won out. I had a fantastic time coloring it, and I couldn't wait to share it with all of you.



Supplies:
Stampendous:
LBP009: Horse Friends

Other:
Imagine: VersaFine Ink in Onyx Black
Bo Bunny: Blueberry Vintage Double Dot Cardstock #12BV807 & Pink Punch Vintage Cardstock #12PPV951
Zig Clean Color Real Brush Markers: 010, 020, 022, 023, 024, 025, 027. 032, 033, 036, 038, 041, 042, 043, 050, 051, 070, 080, 081, 082, 083, 202, 302
Scrapbook Adhesives: EZ-Dots
Canson: Mixed Media Paper
Water Brush


Directions:
1. Stamp Horse Friends on to Mixed Media Paper with VersaFine Ink.

2. Color the stamped image with the colors indicated.

3. Trim the image, leaving a white border.

4. Create the card base w…

Candy Grab: Day 2 of 31

Greetings, Guys & Ghouls! It's Day 2 of the 31 Days of Halloween. Today I have a card that uses a very appropriate stamp for Halloween...it's called Candy Grab and it's from Stampendous. I'm not sure if the skeleton threw them up in the air with joy, or they just fell out of a pinata. But either way, it's a fun stamp! My full instructions on how to recreate this card are below.

Supplies:
Stampendous:
R296: Candy Grab
FREG037: Aged Marine Embossing Powder
FRC20: Hot Lime Fragments

Other:
My Colors Cardstock: Plum
Imagine: Craft Mat, VersaMark Ink, VersaFine Ink in Onyx Black
FaberCastell: PITT Pen- Small
Distress Oxide Inks: Faded Jeans, Wilted Violet, Fired Brick, Peeled Paint, Spiced Marmalade
Canson: Mixed Media Paper
Beacon Adhesieves: Zip Dry Glue
Water Spritzer
Craft Foam
Brush

Directions:

1. Stamp the image with VersaFine ink in Onyx Black on to Canson Mixed Media Paper.

2. Apply Distress Oxide Inks directly to craft mat, using the colors listed.

3. Spritz the i…

Warmest Wishes

Seasons Greetings! This week, the Stampendous team are sharing a few final holiday projects. My card features the delightful Warmest Wishes stamp. I love the vintage feel of the image.

Supplies:
Stampendous:
R300: Warmest Wishes
FRGL02: Twinkle Glitter
FRGL01: Multi Crystal Glitter Mix
DCP1006: Fitted Frames Set B

Other:
My Colors Cardstock: Velvet Night, Evergreen
Zig Clean Color Markers: 010, 022, 034, 036, 038, 041, 044, 060, 062, 64, 065, 070, 091, 092, 095, 097, 230, 302, 901
Imagine: VersaFine Ink in Onyx Black, On Point Glue
Scrapbook Adhesieves: Foam Squares
Canson: Mixed Media Paper

Directions:
1. Stamp the Warmest Wishes stamp on to Mixed Media Paper using Onyx Black VersaFine Ink.

2.Color the image using the Zig Clean Color Markers listed.

3. Apply On Point Glue to areas that you want to have sparkle.

4. Sprinkle the glued areas with Multi Crystal Glitter Mix and let dry.

5. Fussy cut the stamped image.

6. Using Evergreen Cardstock, die cut the Large "R" Fitted Frame.

7. Cr…