Skip to main content

Snowman Peeking

Hello! At Stampendous, we are starting to think about Christmas in July. I know that's not everyone's cup of tea, and usually it's not mine either. But with the release of the July catalog, the new Christmas (and other holiday) images have me almost dreaming of a White Christmas. In addition, we are sharing projects that use fantastic Bo Bunny paper, like their beloved Double Dot collection. Today, I am sharing the adorable Snowman Peeking stencil. There are so many opportunities to customize this guy! Full directions on how I made this card are below. 
*I get free products from some companies (including Stampendous) to share projects with their items. Sometimes, my posts contain affiliate links, at no cost to you. 



Supplies:
Stampendous:
FMS4078: Snowman Peeking Stencil
DWLL332: Picasso Tool/Shield
DP111: Detail Black Embossing Powder
EP222: Carnelian Embossing Powder
EP525: Sparkle Puff Embossing Powder
EP161: Winter Green Embossing Powder
EP180: Aqua Tinsel Embossing Powder
FRG10C: Shaved Ice
MPW811: Mixed Media White Paper

Other:
Imagine: VersaMark Ink, Sponge Dauber, On Point Glue
My Colors Cardstock: Caribbean Sea
Bo Bunny: 12TD300: Turquoise Double Dot
Creative Impressions: #70959- 3/8" Black with White Stitching Ribbon
Scotch Tape, ATG Gun

Directions:
1. Tape the Snowman Peeking Stencil to a piece of Mixed Media Paper, but only at the top, to create a hinge.

2. Using VersaMark Ink and a sponge dauber, apply the ink to the eyes and mouth of the stencil. I recommend using either the Picasso tool or a piece of tape to tape off the nose, so that you don't ink that area accidentally.

3. Lift the stencil up using the tap hinge (keep it attached) and sprinkle Detail Black Embossing Powder on to the inked areas. Heat set.

4. Replace the stencil and ink the nose with VersaMark. Use the Picasso tool or tape to avoid inking other areas.

5. Lift the stencil and sprinkle Carnelian Embossing Powder on. Heat set.

6. Replace the stencil and apply VersaMark Ink to the brim of the hat.

7. Lift the stencil and sprinkle Sparkle Puff Embossing Powder on and heat set.

8. Replace the stencil and ink the largest stripe of the hat.

9. Sprinkle with Winter Green Embossing Powder and heat set.

10. Ink the middle stripe of the hat with VersaMark ink. Using tape to block off this area may be the easiest.

11. Sprinkle Aqua Tinsel Embossing Powder and heat set.

12. Ink the top stripe of the hat.

13. Lift the stencil and sprinkle Winter Green again. Heat set.

14. Apply ink to the puff of the hat.

15. Sprinkle on Sparkle Puff and heat set.


16. Remove the stencil and trim the image down to 3 1/2" x 5."

17. Create the card base out of Caribbean Sea cardstock, cut to 6 1/2" x 10."

18. Create a mat out of Bo Bunny Turquoise Double Dot .

19. Attach a piece of ribbon to the bottom of the mat, and secure on the back.

20. Attach the mat and the stenciled image to the card base.

21. Apply a line of On Point Glue around the edge of the stenciled image and sprinkle on Shaved Ice.

Comments

Pam B said…
This card is so special. Love the colors!
Very cool card. Love the color choices. TFS
Denise Bryant said…
Beautiful card! Love the colors and that adorable snowman!
Carolina Kathy said…
Lovely be the Snowman stencil! Sure makes for a great card! TFS
Carolina Kathy said…
Love the Snowman stencil! Great for a holiday card.
Viki Banaszak said…
This turned out so cute! I love the sparkles you added.
McStamper said…
Love, love your snowman card. Thanks for the wonderful Christmas idea.
Mary Holshouser said…
Very clever.
Love the glitter around
the frame.
thanks for sharing.
Jean said…
How fun! Love this!!
AWWWWW! How cute!!! Love the frosted colors!!
BethW said…
Fantastic use of the stencil. Your tutorial is spot on-thank you for such great inspiration.
NicoleN said…
Lovely card. Love all the sparkle and colors used.
Debbie Craine said…
Great card and the instructions are easy to follow. Thanks for the info.
Sue LD said…
How cute! I like the embossing powders and shaved ice you used.

Popular posts from this blog

Horse Friends

Hello! This week, the Stampendous team is previewing some of the newest stamps that will be in the 2018 January catalog. You are in for a real treat! There are so many wonderful new images! I had a tough time deciding which to share first, but the beautiful Horse Friends stamp by Laurel Burch won out. I had a fantastic time coloring it, and I couldn't wait to share it with all of you.



Supplies:
Stampendous:
LBP009: Horse Friends

Other:
Imagine: VersaFine Ink in Onyx Black
Bo Bunny: Blueberry Vintage Double Dot Cardstock #12BV807 & Pink Punch Vintage Cardstock #12PPV951
Zig Clean Color Real Brush Markers: 010, 020, 022, 023, 024, 025, 027. 032, 033, 036, 038, 041, 042, 043, 050, 051, 070, 080, 081, 082, 083, 202, 302
Scrapbook Adhesives: EZ-Dots
Canson: Mixed Media Paper
Water Brush


Directions:
1. Stamp Horse Friends on to Mixed Media Paper with VersaFine Ink.

2. Color the stamped image with the colors indicated.

3. Trim the image, leaving a white border.

4. Create the card base w…

Candy Grab: Day 2 of 31

Greetings, Guys & Ghouls! It's Day 2 of the 31 Days of Halloween. Today I have a card that uses a very appropriate stamp for Halloween...it's called Candy Grab and it's from Stampendous. I'm not sure if the skeleton threw them up in the air with joy, or they just fell out of a pinata. But either way, it's a fun stamp! My full instructions on how to recreate this card are below.

Supplies:
Stampendous:
R296: Candy Grab
FREG037: Aged Marine Embossing Powder
FRC20: Hot Lime Fragments

Other:
My Colors Cardstock: Plum
Imagine: Craft Mat, VersaMark Ink, VersaFine Ink in Onyx Black
FaberCastell: PITT Pen- Small
Distress Oxide Inks: Faded Jeans, Wilted Violet, Fired Brick, Peeled Paint, Spiced Marmalade
Canson: Mixed Media Paper
Beacon Adhesieves: Zip Dry Glue
Water Spritzer
Craft Foam
Brush

Directions:

1. Stamp the image with VersaFine ink in Onyx Black on to Canson Mixed Media Paper.

2. Apply Distress Oxide Inks directly to craft mat, using the colors listed.

3. Spritz the i…

Warmest Wishes

Seasons Greetings! This week, the Stampendous team are sharing a few final holiday projects. My card features the delightful Warmest Wishes stamp. I love the vintage feel of the image.

Supplies:
Stampendous:
R300: Warmest Wishes
FRGL02: Twinkle Glitter
FRGL01: Multi Crystal Glitter Mix
DCP1006: Fitted Frames Set B

Other:
My Colors Cardstock: Velvet Night, Evergreen
Zig Clean Color Markers: 010, 022, 034, 036, 038, 041, 044, 060, 062, 64, 065, 070, 091, 092, 095, 097, 230, 302, 901
Imagine: VersaFine Ink in Onyx Black, On Point Glue
Scrapbook Adhesieves: Foam Squares
Canson: Mixed Media Paper

Directions:
1. Stamp the Warmest Wishes stamp on to Mixed Media Paper using Onyx Black VersaFine Ink.

2.Color the image using the Zig Clean Color Markers listed.

3. Apply On Point Glue to areas that you want to have sparkle.

4. Sprinkle the glued areas with Multi Crystal Glitter Mix and let dry.

5. Fussy cut the stamped image.

6. Using Evergreen Cardstock, die cut the Large "R" Fitted Frame.

7. Cr…