Skip to main content

Snowman Peeking

Hello! At Stampendous, we are starting to think about Christmas in July. I know that's not everyone's cup of tea, and usually it's not mine either. But with the release of the July catalog, the new Christmas (and other holiday) images have me almost dreaming of a White Christmas. In addition, we are sharing projects that use fantastic Bo Bunny paper, like their beloved Double Dot collection. Today, I am sharing the adorable Snowman Peeking stencil. There are so many opportunities to customize this guy! Full directions on how I made this card are below. 
*I get free products from some companies (including Stampendous) to share projects with their items. Sometimes, my posts contain affiliate links, at no cost to you. 



Supplies:
Stampendous:
FMS4078: Snowman Peeking Stencil
DWLL332: Picasso Tool/Shield
DP111: Detail Black Embossing Powder
EP222: Carnelian Embossing Powder
EP525: Sparkle Puff Embossing Powder
EP161: Winter Green Embossing Powder
EP180: Aqua Tinsel Embossing Powder
FRG10C: Shaved Ice
MPW811: Mixed Media White Paper

Other:
Imagine: VersaMark Ink, Sponge Dauber, On Point Glue
My Colors Cardstock: Caribbean Sea
Bo Bunny: 12TD300: Turquoise Double Dot
Creative Impressions: #70959- 3/8" Black with White Stitching Ribbon
Scotch Tape, ATG Gun

Directions:
1. Tape the Snowman Peeking Stencil to a piece of Mixed Media Paper, but only at the top, to create a hinge.

2. Using VersaMark Ink and a sponge dauber, apply the ink to the eyes and mouth of the stencil. I recommend using either the Picasso tool or a piece of tape to tape off the nose, so that you don't ink that area accidentally.

3. Lift the stencil up using the tap hinge (keep it attached) and sprinkle Detail Black Embossing Powder on to the inked areas. Heat set.

4. Replace the stencil and ink the nose with VersaMark. Use the Picasso tool or tape to avoid inking other areas.

5. Lift the stencil and sprinkle Carnelian Embossing Powder on. Heat set.

6. Replace the stencil and apply VersaMark Ink to the brim of the hat.

7. Lift the stencil and sprinkle Sparkle Puff Embossing Powder on and heat set.

8. Replace the stencil and ink the largest stripe of the hat.

9. Sprinkle with Winter Green Embossing Powder and heat set.

10. Ink the middle stripe of the hat with VersaMark ink. Using tape to block off this area may be the easiest.

11. Sprinkle Aqua Tinsel Embossing Powder and heat set.

12. Ink the top stripe of the hat.

13. Lift the stencil and sprinkle Winter Green again. Heat set.

14. Apply ink to the puff of the hat.

15. Sprinkle on Sparkle Puff and heat set.


16. Remove the stencil and trim the image down to 3 1/2" x 5."

17. Create the card base out of Caribbean Sea cardstock, cut to 6 1/2" x 10."

18. Create a mat out of Bo Bunny Turquoise Double Dot .

19. Attach a piece of ribbon to the bottom of the mat, and secure on the back.

20. Attach the mat and the stenciled image to the card base.

21. Apply a line of On Point Glue around the edge of the stenciled image and sprinkle on Shaved Ice.

Comments

Pam B said…
This card is so special. Love the colors!
Very cool card. Love the color choices. TFS
Denise Bryant said…
Beautiful card! Love the colors and that adorable snowman!
Carolina Kathy said…
Lovely be the Snowman stencil! Sure makes for a great card! TFS
Carolina Kathy said…
Love the Snowman stencil! Great for a holiday card.
Viki Banaszak said…
This turned out so cute! I love the sparkles you added.
McStamper said…
Love, love your snowman card. Thanks for the wonderful Christmas idea.
Mary Holshouser said…
Very clever.
Love the glitter around
the frame.
thanks for sharing.
Jean said…
How fun! Love this!!
AWWWWW! How cute!!! Love the frosted colors!!
BethW said…
Fantastic use of the stencil. Your tutorial is spot on-thank you for such great inspiration.
NicoleN said…
Lovely card. Love all the sparkle and colors used.
Debbie Craine said…
Great card and the instructions are easy to follow. Thanks for the info.
Sue LD said…
How cute! I like the embossing powders and shaved ice you used.

Popular posts from this blog

Christmas Package

Hello! This week, the Stampendous Design Team will be sharing projects that fit the theme, "Dear Santa, I've Been Good!" I used the sweet Christmas Package stencil (which frankly, can be used for plenty of other occasions too!), and a scrap I had leftover from the Chevron Stencil. Check out the full tutorial below.



Supplies:
Stampendous: 
DWLL466: Christmas Package
DWLX7026: Chevron Stencil
MGK01: Fall Micro Glitter Kit
MGK02: Christmas Micro Glitter Kit
DWDGP: Gold Embossing Paste
DWDGWP: Glossy White Embossing Paste
DWDPK: Palette Knife
FX71: Sticky Panels

Other: 
My Colors Cardstock: Dare Devil, Parrot
Molotow: 2mm Round Pen in Signal White
EK Success: Corner Rounder
Beacon Adhesives: Zip Dry

Directions:
1. Tape Christmas Package stencil to Dare Devil cardstock. Tape off the bow so that you don't get paste on it. Paste the box with your Palette Knife and Glossy White Embossing Paste. Remove stencil to wash. While the paste is still wet, sprinkle Lime Micro Glitter from the Hal…

Standing in the Clouds with ADfD

Hello! I have a new card with a lovely image from A Day for Daisies to share with you today. The digi is called Standing in the Clouds.

I colored this beauty with Zig Clean Color Markers and a water brush. Here's a close up.

My background was created with the Piasso Stencil from Dreamweaver (available from Stampendous), White VersaColor Ink (from Imagine), a sponge dauber, and Detail White Embossing Enamel. Then I sprayed the background with Sheer Shimmer Spritz in Frost. You'll see that better in the photo below. The entire background looks frosty. My sentiment is from the Soaring Sentiments set. I edged it and my card base with Bahama Blue and Danube Blue Memento Ink, which really matched her jacket perfectly.

See the pretty shimmer? I love the Sheer Shimmer Spritzes, and I encourage you to give them a try. I'll have another project for A Day for Daises soon, and our February challenge will be posted on Friday. Thanks for stopping by. Have an inspiring day!

Creamy Cupcake

Hello! This week, the Stampendous team is sharing different projects for birthdays. Who doesn't love to get a birthday card? My card for today is bold and bright!

Supplies:
Stampendous:
FMS4072: Creamy Cupcake Metal Stencil
Pen from any of the Stencil Duos sets

Other:
My Colors Cardstock: Coral Rose
Zig Clean Color Markers: 025, 033, 062, 080
Memories Mist: Blue Martini, Lavender Tea
Imagine: Turquoise Gem Versa Magic, Rose Bud Fireworks! Spray
Canson Watercolor Paper and Mixed Media Paper
Beacon Adheseives: Zip Dry Glue


Directions:
1. Using Canson Mixed Media Paper, tape down the stencil and trace it with the pen from a Stencil Duo set.

2. Take off the stencil and color in the image using the above listed Zig Clean Color Markers.

3. Cut out the cupcake leaving a border around the image.

4. On the watercolor paper, spray the Memories Mist and Fireworks! Spray.

5. Trim dried watercolor paper to 5" x 3 3/4."

6. Create the card base with Coral Rose cardstock cut to 5 1/2" x 8…